How to Print Your Own Labels: A Practical Guide for Small Businesses

The first time you print your own labels, the design is often the easy part. Getting it to line up on the sheet, look sharp on a small bottle and stay put once the bottle comes out of the fridge is where things get interesting. A few test prints can save you from wasting a whole pack of labels or relabelling an afternoon’s worth of orders.

If you’re wondering how to print your own labels, start with one product and one small batch. Use the packaging you’ll actually sell or ship, and work through these steps before committing to a printer or ordering a large supply of labels.

1. Decide what you need the label to do

A label for a parcel has a different job from one on a jar of jam. The parcel label needs to stay readable through delivery. The jam label has to fit the jar, show the product information clearly and look consistent across the range.

Write down three things before you shop: what the label will stick to, how long it needs to last and what you need to print on it. Then decide which details change. Shipping addresses, batch codes and stock numbers are good candidates for printing in-house. If your artwork stays the same across hundreds of units, you can also order custom printed product labels and leave space to add variable information yourself.

2. Choose a printer that suits the job

You might already have the printer you need. An office inkjet or laser printer can be a practical option for occasional full-colour labels, provided the sheets are designed for that printer. A dedicated roll printer makes more sense when you regularly print shipping labels, barcodes or batch information.

Printer typeWhen to consider itWhat to check before buying supplies
Inkjet or laserSmall batches of colour labels or designs that change frequentlyChoose sheets compatible with your printer type and check the recommended feed settings.
Direct thermalRoutine shipping or other short-term labelsUse direct thermal label stock. This print method doesn’t require a ribbon.
Thermal transferBarcodes or identification labels that need to stay readable for longerCheck that the printer, ribbon and label material are compatible.

If you’re comparing Soabar’s label printers, use your busiest day as the benchmark. Printing ten shipping labels on a quiet afternoon is different from getting a hundred parcels ready before the courier arrives.

3. Pick a label material and measure the pack

Measure the area where the label will sit. For a bottle or jar, pay attention to where the container starts to taper. For a pouch, take measurements after filling it. A label that fits an empty pouch can end up crossing a fold once the product is inside.

Next, think about what happens after application. Paper can be a sensible starting point for a dry carton. If your product goes into a fridge or the pack is handled frequently, ask for a sample suited to those conditions and test it on the actual surface. For jars, bottles or chilled tubs, Soabar’s food packaging labels are a starting point for comparing options.

4. Set up your design at actual size

If you’re printing on sheets, use the template that matches your exact label stock. Two sheets can have the same number of labels but different margins or gaps. For roll labels, enter the correct label width and height in your printing software and check the media settings for the printer.

Keep small text away from the edges, where a slight shift is more noticeable. If you’re including a barcode, give it clear space and test it with the scanner you’ll use. Save a separate file for each label size, and name it clearly enough that someone else can pick the right template without opening every file.

5. Print one test before running a batch

For sheet labels, print the design on ordinary paper first. Set the print scale to 100% or Actual size, then hold the printout against a blank label sheet to see whether everything lines up. If the first row matches but the last row drifts, check the page size, scaling and template before manually moving the artwork.

For roll labels, start with one or two prints. If the printer skips labels or starts in the wrong place, check that the selected media settings match your roll and follow the printer’s calibration instructions.

Apply a finished test label to the real pack. Read the smallest text, scan the barcode if there is one and run the pack through its normal storage and handling. If it’s a chilled bottle, check the label again after condensation has formed. Once the sample passes, print a short batch and check the first and last labels before running the rest.

Frequently asked questions

Can I print my own labels with a normal printer?

Yes, if you use sheets made for your inkjet or laser printer. A standard printer is often enough for occasional label runs. If you print shipping labels or barcodes every day, a roll printer may be more convenient.

Why are my labels printing out of alignment?

Start by checking the template, paper size and print scale. A “Fit to page” setting can resize the artwork and throw off the alignment. If you use a roll printer, check the label dimensions and media settings too.

Is it cheaper to print labels myself?

It depends on how many you need and how often the design changes. In-house printing can be practical for short runs and variable information. For repeat orders with fixed artwork, compare a supplier’s quote against the cost of your materials, test prints and staff time.

Get your label printing setup right with Soabar

Before buying anything, gather a pack sample, your label dimensions and an estimate of how many labels you’ll print on a busy day. If you already have a printer, note the model so you can check which materials and ribbons it accepts. Contact Soabar to discuss a setup that fits the way you pack and print.

Comments

  • No comments yet.
  • Add a comment